Unicorn Mouldings - Installation Guide

Skip Navigation

Installation Guide

Before Installation

 

 

We recommend that Flexi-Tiles are placed into the room where they are to be fitted for 24 hours prior to installation.  This allows the tiles to acclimatize to their environment. In some cases where there are extreme variances in temperature or direct sunlight Flexi-Tiles may need to be glued down, as the intense heat will cause them to shrink or expand.   We recommend using a suitable vinyl adhesive.  Flexi-Tile can be installed onto any floor that is clean, level and firm.  Brush the existing floor to make sure the floor is clean of dust and dirt.

 

 

 

You will need:

 

  • Sharp Knife - fitted with a heavy duty blade

 

  • Straight Edge

 

  • Cutting Board & Tape Measure

 

  • Pencil or Chalk Marker

 

  • A Rubber Mallet
 

Web development by Tibus